hikvision networking
NTP, time zones & recording timestamps
Before blaming VMS gaps, verify Stratum sources, firewall rules, and DST policies—time drift breaks investigations.
Accurate timestamps tie card access, ANPR, and video together. If cameras sync to different sources, incident reconstruction becomes a nightmare. Configure NTP to redundant internal stratum servers or vendor-approved pools, not a single consumer router.
Firewall paths
Allow UDP 123 (and any modern alternatives your standard uses) from the CCTV VLAN to the time source. Blocked NTP often fails silently for days.
Documentation
Record the configured timezone versus UTC expectations for SOC teams. DST jumps should be tested annually.
More on SADP Tool
More articles
- How to Activate a Hikvision IP Camera
Use SADP from HiTools on your LAN to find inactive Hikvision cameras, set an admin password, verify in a browser, then tune IP and security.
- How to Activate Hikvision NVR Step by Step
Activate a Hikvision NVR with SADP: find Inactive, set password & IP, browser login, live view, add cameras on a switch.
- Change camera & NVR IPs with SADP
Change Hikvision camera and NVR IPs with SADP: requirements, step-by-step Modify workflow, DHCP off, verification, common fixes, best practices, and FAQs.
- How to Set Up and Activate a Hikvision DVR
SADP finds inactive Hikvision DVRs on the LAN: activate with a strong password, set IP/DHCP, use the web UI & optional Hik-Connect.